Nanoscience and Nanotechnology
Open in the Padhaiko app6.1 Introduction and types of nano materials (0-, 1-, 2- and 3-dimensional)
Nanoscience studies matter at the scale of to (), and nanotechnology designs and uses materials, devices and systems at this scale. A nanomaterial has at least one dimension in this range. At this scale two effects change the properties of a material compared with its bulk form:
- High surface-to-volume ratio: for a sphere of diameter the ratio is , so a fraction of atoms at the surface rises sharply as the size falls. This raises chemical reactivity and catalytic activity.
- Quantum confinement: when the size is comparable to the de Broglie wavelength of the electrons (or the exciton size), the energy levels become discrete and the band gap increases as the size falls ( for a particle in a box). Optical colour, electrical conductivity and magnetism then depend on the size.
Other size effects: lower melting point (gold melts at in bulk but near for particles), higher strength in nanocrystalline metals, and surface plasmon resonance in metal nanoparticles (colloidal gold is red, and silver is yellow).
| Class | Dimensions confined to nanoscale | Free (bulk) dimensions | Examples |
|---|---|---|---|
| 0-D | All three (, , ) | None | Nanoparticles, quantum dots, fullerenes () |
| 1-D | Two | One | Nanowires, nanorods, nanotubes, nanofibers |
| 2-D | One | Two | Graphene, MXenes, thin films, nanosheets, coatings |
| 3-D | None, but nanoscale internal structure | Three | Bulk nanocrystalline solids, nanocomposites, aerogels, assemblies of nanoparticles and nanotube bundles |
6.2 Nanoparticles, nanofibers, nanowires, carbon nanotubes, graphene, MXene and quantum dots, and their uses
| Nanomaterial | Structure and properties | Uses |
|---|---|---|
| Nanoparticles (Au, Ag, , ZnO, ) | to particles with large surface area and size-dependent colour | Catalysts, antibacterial coatings (Ag), sunscreens (ZnO, ), drug delivery and hyperthermia, MRI contrast (), self-cleaning glass |
| Nanofibers | Fibres of diameter below to with very large length; electrospun polymer or carbon | Filters and face masks, tissue-engineering scaffolds, wound dressings, battery separators, protective textiles |
| Nanowires | Solid wires of diameter a few nm and large length (Si, ZnO, Ag); electrons move along one direction | Transistors, sensors, solar cells, lithium-ion battery anodes (Si), transparent electrodes |
| Carbon nanotubes (CNT) | Rolled sheet of graphene; single- (SWCNT) or multi-walled (MWCNT); metallic or semiconducting; tensile strength about times that of steel at a sixth of its weight; thermal conductivity above that of copper | Composites, conductive plastics, field-effect transistors, electrodes and sensors, hydrogen storage |
| Graphene | One-atom-thick sheet of carbon in a honeycomb lattice; transparent, strong, very high electron mobility and thermal conductivity | Flexible electronics, touch screens, supercapacitors, batteries, composites, water filtration membranes |
| MXene (, for example ) | 2-D transition-metal carbides or nitrides obtained by etching the A layer (Al) from MAX phases, with surface groups (-O, -OH, -F); metallic conductivity and hydrophilic | Supercapacitors, batteries, electromagnetic-interference shielding, catalysis, water purification, sensors |
| Quantum dots (CdSe, CdS, InP, carbon dots) | Semiconductor crystals of to whose band gap and emission colour depend on size | QLED displays, solar cells, bio-imaging, LEDs, sensors |
Structure of carbon nanotubes. The tube is described by the chiral indices : the diameter is
Armchair tubes () are metallic; zigzag () and chiral tubes are metallic when is a multiple of and semiconducting otherwise.
Size and colour of quantum dots. The band gap of a spherical dot of radius is estimated by the Brus equation
The second term (confinement) dominates, so smaller dots emit light of shorter wavelength (blue) and larger dots longer wavelength (red).
6.1
(a) For a CdSe quantum dot of radius (, , , ) the confinement term is and the Coulomb term . Find the emission energy and wavelength, and say how the colour changes for a dot of radius (emission at ). (b) Find the diameter of a carbon nanotube.
(a) Emission of the dot:
A larger dot () has a smaller confinement term, and (orange), so the colour shifts to the red as size increases.
(b) Nanotube diameter:
It is an armchair tube, so it is metallic.
(a) (), shifting to the red at larger size; (b) , metallic.
6.2
Compare the surface-to-volume ratio of gold spheres of diameter and , and estimate the number of atoms in a gold particle (, ).
Surface-to-volume ratio ():
The ratio is , so the small particles expose times more surface per unit volume.
Number of atoms: Volume per atom .
About a third of these atoms are on the surface.
Ratio ( and ); about atoms.
6.3 Preparation of nanomaterials
| Aspect | Top-down approach | Bottom-up approach |
|---|---|---|
| Principle | A bulk material is broken or etched down to nanoscale | Atoms or molecules assemble into nanostructures |
| Methods | Ball milling, lithography, laser ablation, sputtering, etching | Sol-gel, chemical reduction, co-precipitation, hydrothermal, CVD, electrospinning, self-assembly |
| Control of size and shape | Poor to moderate; defects and contamination | Good, with narrow size distribution and fewer defects |
| Cost and scale | Simple and scalable for powders, costly equipment for lithography | Cheap for solution methods; scalable |
Key methods.
- Ball milling (top-down): hard balls in a rotating or planetary mill fracture the coarse powder by impact and shear into to particles. Simple and scalable but gives contamination and wide size distribution.
- Chemical reduction of metal salts (bottom-up): a metal ion is reduced to atoms that nucleate and grow, with a capping agent (citrate, PVP, thiol) preventing aggregation. Example: gold nanoparticles by the Turkevich method, reduced by citrate; silver nanoparticles by : .
- Sol-gel process: a metal alkoxide or salt is hydrolyzed and condensed to a sol, then a gel, then dried and calcined to oxide nanoparticles or films, for example from titanium isopropoxide: , then .
- Hydrothermal and solvothermal synthesis: reactants in a sealed autoclave at to and high pressure give crystalline nanoparticles, nanorods and nanowires of controlled shape.
- Chemical vapour deposition (CVD): a hydrocarbon such as methane or acetylene decomposes at to over a metal catalyst (Fe, Ni, Cu) giving carbon nanotubes on Fe and graphene on a Cu foil.
- Electrospinning: a polymer solution is drawn by a high voltage ( to ) from a needle to a collector, and the solvent evaporates to leave nanofibers.
- Co-precipitation and green synthesis: for example from and with base, or plant extracts as reducing and capping agents to prepare Ag and Au nanoparticles.
- Top-down synthesis of graphene and MXene: mechanical exfoliation of graphite (adhesive tape), liquid-phase exfoliation, and reduction of graphene oxide; MXene by selectively etching the Al from with HF or : .
- Characterization: UV-visible (surface plasmon band), XRD (size by the Scherrer equation), TEM and SEM (shape and size), and dynamic light scattering.
6.3
Silver nanoparticles are made by reducing of with sodium borohydride. Find the mass of used and the maximum mass of silver in the colloid (, ).
Moles: .
Masses: . Since is , .
of ; at most of Ag.
Exercises
Practice Exercises — Nanoscience and Nanotechnology
What is a nanomaterial? Classify nanomaterials by dimensionality with two examples of each class. Why do the properties of materials change at nanoscale?
Definition and classification: A nanomaterial has at least one dimension of to . 0-D: nanoparticles and quantum dots; 1-D: nanowires and carbon nanotubes; 2-D: graphene and MXene; 3-D: nanocomposites and nanocrystalline bulk solids.
Why properties change: The surface-to-volume ratio rises sharply, so surface atoms (more reactive) dominate, and quantum confinement turns continuous energy bands into discrete levels with a size-dependent band gap.
Classes: 0-D, 1-D, 2-D and 3-D. Property changes arise from surface effect and quantum confinement.
Describe the structure of single-walled carbon nanotubes and state four uses. Find the diameters of (5,5) and (10,0) tubes () and say which is metallic.
Structure and uses: A SWCNT is a graphene sheet rolled into a cylinder specified by . Uses: composites, conductive plastics, transistors and sensors, battery and supercapacitor electrodes.
Diameters: and . The tube is an armchair tube () and is metallic. : is not a multiple of , so it is semiconducting.
and ; is metallic and semiconducting.
Explain why the emission colour of quantum dots depends on size. A CdSe dot emits at ; find the wavelength and the colour.
Quantum confinement: The energy gap of a dot increases roughly as when the radius falls, so small dots absorb and emit higher-energy (blue) light and large dots lower-energy (red) light.
Wavelength: , which is orange.
(orange).
Distinguish between top-down and bottom-up approaches to nanomaterials. Describe the sol-gel preparation of nanoparticles and the CVD preparation of carbon nanotubes.
Approaches: Top-down reduces a bulk material to the nanoscale (ball milling, lithography), whereas bottom-up assembles atoms or molecules (sol-gel, reduction, CVD); the latter gives better size control and fewer defects.
Sol-gel : Titanium isopropoxide is hydrolyzed in alcohol and water, ; condensation gives a gel, which is dried and calcined at about : .
CVD of CNT: A hydrocarbon (methane or acetylene) is passed at to over Fe or Ni nanoparticles; it decomposes and carbon dissolves and precipitates as nanotubes.
Sol-gel: hydrolysis, condensation, drying, calcination. CVD: catalytic decomposition of hydrocarbon at high temperature.
List the properties and applications of graphene and of MXenes. Compare the surface-to-volume ratio of a particle with that of a particle.
Graphene and MXene: Graphene is a one-atom-thick carbon sheet: transparent, very strong, with high conductivity; used in flexible electronics, supercapacitors and membranes. MXenes () are 2-D carbides with metallic conductivity and hydrophilic surfaces; used in energy storage, EMI shielding and water purification.
Ratio: : and . The particle has times the surface-to-volume ratio.
Ratio ( against ).