Engineering Materials
Open in the Padhaiko app7.1 Polymers
A polymer is a macromolecule made of a very large number of small repeating units (monomers) joined by covalent bonds. For example, ethylene gives polyethylene . The degree of polymerization is , with the molar mass of the polymer and that of the repeat unit.
Because a polymer sample has chains of different lengths, there are two common averages for chains of molar mass :
7.1.1 Natural and synthetic, organic and inorganic, conducting and non-conducting polymers
| Basis | Classes | Examples |
|---|---|---|
| Origin | Natural | Cellulose, starch, proteins, natural rubber, DNA |
| Origin | Synthetic | Polyethylene, PVC, nylon, polystyrene, Teflon |
| Backbone | Organic (carbon backbone) | Polyethylene, PMMA, nylon |
| Backbone | Inorganic (no carbon in the main chain) | Silicones , polyphosphazenes , polysulfur nitride , polysilanes |
| Electrical behaviour | Non-conducting (insulating) | Polyethylene, PVC, Bakelite (cable insulation) |
| Electrical behaviour | Conducting | Doped polyacetylene, polyaniline, polypyrrole, PEDOT |
| Structure | Linear, branched, cross-linked | HDPE, LDPE, vulcanized rubber and Bakelite |
| Thermal behaviour | Thermoplastic (soften on heating) | Polyethylene, PVC, nylon |
| Thermal behaviour | Thermosetting (cross-linked, hard on heating once set) | Epoxy, Bakelite, melamine resin |
7.1.2 Types of polymerization: addition and condensation
| Aspect | Addition polymerization | Condensation polymerization |
|---|---|---|
| Monomers | Contain a double or triple bond (vinyl type) | Two different functional groups per molecule (such as -COOH, -OH, -) |
| By-product | None, so the repeat unit has the monomer's formula | Small molecule lost (, , ) |
| Mechanism | Initiation, propagation and termination (free radical, cationic or anionic) | Stepwise reaction between functional groups; chain grows slowly |
| Molar mass | High molar mass formed quickly even at low conversion | Molar mass rises only at high conversion |
| Examples | Polyethylene, PVC, PMMA, polyacrylonitrile | Nylon-6,6, polyester, polycarbonate, Kevlar, Bakelite |
Free-radical addition (example, polyethylene or polystyrene): initiation , ; propagation by repeated addition of monomer; termination by combination or disproportionation of two radicals.
7.1.3 Preparation and applications of important polymers
| Polymer | Preparation | Properties and uses |
|---|---|---|
| Epoxy resin | Condensation of bisphenol-A with epichlorohydrin in presence of NaOH gives the prepolymer; cross-linked (cured) with a polyamine or anhydride hardener | Strong, adhesive, chemically resistant; adhesives (Araldite), coatings, circuit boards, composites |
| Polyurethane | Polyaddition of a diisocyanate with a diol or polyol: links | Flexible and rigid foams (mattresses, insulation), elastomers, paints, shoe soles |
| Kevlar (aramid) | Condensation of terephthaloyl chloride with -phenylenediamine, losing HCl; rigid rod chains with hydrogen bonds | Very high strength-to-weight ratio; bulletproof vests, ropes, tyre cord, helmets |
| Polycarbonate | Bisphenol-A with phosgene (or diphenyl carbonate), losing HCl (or phenol) | Transparent, impact resistant; CDs and DVDs, helmets, lenses, bottles |
| Polymethyl methacrylate (PMMA) | Free-radical addition polymerization of methyl methacrylate | Transparent (Perspex, acrylic glass); windows, lenses, sign boards, bone cement |
| Polyacrylonitrile (PAN) | Free-radical addition of acrylonitrile | Acrylic fibres (wool substitute); precursor of carbon fibre (heated to about ) |
| Silicones | Hydrolysis of dichlorodimethylsilane, , then condensation to | Heat-stable and water-repellent oils, greases, sealants, rubber, medical implants |
| Phosphorus-based polymer (polyphosphazene) | Ring-opening polymerization of at to , then replacing Cl with or groups | Flexible at low temperature, flame resistant; elastomers, biomedical materials, fuel-cell membranes |
| Sulfur-based polymer | Polymeric sulfur from heating above (ring-opening); vulcanization of rubber with sulfur bridges; polyphenylene sulfide | Vulcanized rubber (tyres); engineering plastics and coatings (PPS); high-refractive-index optics |
Nylon-6,6 (for comparison): .
7.1
(a) Polyethylene has a molar mass of (). Find the degree of polymerization. (b) A sample has chains of and chains of . Find , and the PDI. (c) Find the mass of nylon-6,6 repeat unit formed per of adipic acid (), with excess hexamethylenediamine ().
(a) Degree of polymerization: .
(b) Averages:
(c) Nylon-6,6 yield: The repeat unit has . One mole of adipic acid gives one repeat unit, so
(a) ; (b) , , ; (c) .
7.1.4 Conducting polymers: synthesis and application
Most polymers are insulators, but a polymer with a conjugated backbone (alternating single and double bonds) becomes conducting when doped.
- Polyacetylene made by Ziegler-Natta polymerization of acetylene is a semiconductor () and reaches metallic conductivity () after doping with (p-doping, oxidation, removing electrons to create mobile positive charges called polarons or bipolarons) or with sodium (n-doping, reduction).
- Polyaniline (PANI): aniline is oxidized by ammonium persulfate in aqueous at to and the green emeraldine salt precipitates; the acid is also the dopant.
- Polypyrrole by chemical () or electrochemical oxidation of pyrrole at an electrode, and PEDOT:PSS (a water-dispersible polymer for transparent films).
Mechanism of conduction: doping creates charge carriers along the -conjugated chain, which move along the chain and hop between chains. Applications: rechargeable batteries and supercapacitors, antistatic coatings and EMI shielding, organic LEDs (OLEDs), solar cells, sensors, electrochromic windows, and corrosion-protecting coatings.
7.1.5 Composite: fibre-reinforced polymer
A composite combines two or more distinct materials to give properties that neither has alone. A fibre-reinforced polymer (FRP) consists of strong, stiff fibres (glass, carbon, aramid) embedded in a polymer matrix (epoxy, polyester, nylon). The fibres carry the load, and the matrix binds them, transfers the stress between fibres and protects them.
For fibres aligned with the load (equal strain, rule of mixtures) and perpendicular to it (equal stress):
Composites are anisotropic, strong in the fibre direction and weak across it. Glass-fibre FRP is used in boat hulls, tanks, pipes and roofing sheets; carbon-fibre FRP in aircraft, sports goods and racing cars; Kevlar FRP in armour.
7.2
A glass-fibre/epoxy composite has fibres by volume () in an epoxy matrix (). Find the modulus along and across the fibres.
Along the fibres: .
Across the fibres:
The material is more than six times stiffer along the fibres.
; .
7.1.6 Natural polymers: cellulose, chitin, chitosan and collagen
| Polymer | Monomer and linkage | Source | Properties and uses |
|---|---|---|---|
| Cellulose | -D-glucose joined by - glycosidic bonds; linear chains with extensive hydrogen bonding | Plant cell walls, cotton (), wood | Strong, insoluble in water; paper, cotton cloth, rayon, cellulose acetate, nitrocellulose |
| Chitin | -acetyl-D-glucosamine units joined by - bonds (cellulose with an group in place of at ) | Shells of crabs and shrimp, insect exoskeleton, fungal walls | Tough and insoluble; sutures, wound dressings, water treatment |
| Chitosan | Deacetylated chitin (more than free groups), prepared by heating chitin with concentrated NaOH | Chitin | Soluble in dilute acid, cationic, biodegradable, antibacterial; drug delivery, wound healing, heavy-metal removal, food packaging |
| Collagen | Triple helix of three polypeptide chains with the repeat Gly-X-Y (X and Y often proline and hydroxyproline) | Skin, tendon, bone, cartilage | The main structural protein of animals; leather, gelatin, cosmetics, biomaterials, artificial skin |
7.2 Cement: hydration and setting chemistry of cement
Portland cement is made by heating limestone () and clay (silica, alumina, iron oxide) to about in a rotary kiln to form clinker, which is ground with to gypsum (). Typical oxide composition is CaO to , to , to , to , MgO below and to .
| Compound | Formula | Name | Share (%) | Role |
|---|---|---|---|---|
| Tricalcium silicate (alite) | to | Early strength (first days), high heat | ||
| Dicalcium silicate (belite) | to | Slow gain of strength after days, low heat | ||
| Tricalcium aluminate | to | Flash set (needs gypsum), high heat, poor sulfate resistance | ||
| Tetracalcium aluminoferrite | to | Lowers kiln temperature; grey colour |
Hydration and Setting of Cement
When water is added, the compounds hydrate to form a rigid network of crystals and gel. The main reactions are:
The product is the calcium silicate hydrate (C-S-H) gel, responsible for most of the strength and binding; (portlandite) makes the pore solution alkaline () which protects steel reinforcement.
- Role of gypsum: reacts instantly with water (flash set). Gypsum reacts with it to form insoluble ettringite, , which coats the grains and delays the set so there is time to mix and place the concrete.
- Setting and hardening: Setting is the stiffening of the paste: initial set (not before ) when it loses plasticity, and final set (not later than ) when it becomes rigid. Hardening is the later gain of strength from continued hydration ( of strength at days and full strength at days).
- Water-cement ratio: about of the cement mass is chemically bound and a further is held in the gel, so a minimum is needed for complete hydration; more water gives workability but a more porous, weaker concrete.
- Curing (keeping the concrete moist for to days) is needed for hydration to continue. Hydration is exothermic, hence cooling is needed in massive structures.
- Deterioration: sulfate attack, carbonation ( lowers the pH and lets the steel rust) and alkali-silica reaction.
7.3
A cement has the oxide analysis CaO , , , and . Use Bogue's equations to find the percentages of , , and .
Bogue's equations:
Numbers:
, , , .
Exercises
Practice Exercises — Polymers and Cement
Distinguish between addition and condensation polymerization with examples. How is PMMA prepared and where is it used? If PMMA has a molar mass of (), find its degree of polymerization.
Comparison: Addition polymers form by chain growth from unsaturated monomers with no by-product (polyethylene, PMMA, PVC); condensation polymers form by step growth between two functional groups with loss of a small molecule (nylon-6,6 losing , Kevlar losing HCl).
PMMA and DP: Methyl methacrylate is polymerized by free-radical addition (initiator benzoyl peroxide) giving , used as acrylic glass, lenses, sign boards and bone cement. .
. PMMA is made by free-radical addition polymerization.
Write short notes on epoxy resin, polyurethane, Kevlar and polycarbonate: monomers, type of polymerization and one use of each.
Epoxy resin: Bisphenol-A and epichlorohydrin (condensation, with loss of HCl) give a prepolymer that is cured with a polyamine; used in adhesives and composites.
Polyurethane: A diisocyanate with a diol (polyaddition, no by-product); foams and elastomers.
Kevlar and polycarbonate: Kevlar: terephthaloyl chloride and -phenylenediamine (condensation, loss of HCl), bulletproof vests. Polycarbonate: bisphenol-A and phosgene (condensation), CDs and safety helmets.
Epoxy and polycarbonate and Kevlar are condensation polymers; polyurethane is formed by polyaddition.
What are conducting polymers? Explain doping with the example of polyacetylene and state four applications. A carbon-fibre/epoxy composite has fibre by volume (, ); find and .
Conducting polymers and doping: These are polymers with a conjugated backbone, such as polyacetylene, polyaniline and polypyrrole. Pure polyacetylene is a semiconductor, but oxidation with iodine removes electrons from the system to create mobile positive polarons, raising the conductivity by many orders of magnitude (p-doping); n-doping with sodium adds electrons. Applications: batteries and supercapacitors, OLEDs, antistatic coatings and sensors.
Composite moduli: , and so .
; .
Describe cellulose, chitin, chitosan and collagen with the repeating unit, source and one application of each.
Polysaccharides: Cellulose: -1,4-linked glucose, plant fibre, paper and textiles. Chitin: -1,4-linked -acetylglucosamine, crustacean shells, sutures. Chitosan: deacetylated chitin with free groups, soluble in dilute acid, used for wound dressing and water treatment.
Collagen: A protein of three polypeptide chains in a triple helix with Gly-X-Y repeats, found in skin and bone, used for gelatin, leather and biomaterials.
Cellulose and chitin are -1,4 polysaccharides, chitosan is deacetylated chitin and collagen is a triple-helical protein.
Name the four major compounds of Portland cement and give the function of each. Explain the hydration and setting of cement with equations and the function of gypsum. What is the minimum mass of water needed for complete hydration of of cement (use )?
Compounds and hydration: (early strength), (later strength), (flash set, heat) and (flux, colour). Hydration: and . The C-S-H gel binds the grains and gives strength.
Gypsum and water: Gypsum forms insoluble ettringite on and retards flash set. The minimum water is .
of water; gypsum delays the setting.